CREE LED Power Supply PCBa

CREE LED Power Supply PCBa

CREE LED Power Supply PCBa typically uses both sides by adding small conductive vias to the PCB. The solder joint consists of an open metal plate containing a central hole for connecting the wires that send and receive signals. The wire that originates in a wire or battery is the ground, which usually spreads over the entire PCB over a long path.

Chat Now

Product Details

Product description:

CREE LED Power Supply PCBa typically uses both sides by adding small conductive vias to the PCB. The solder joint consists of an open metal plate containing a central hole for connecting the wires that send and receive signals. The wire that originates in a wire or battery is the ground, which usually spreads over the entire PCB over a long path. The ground is easily identified as a path chain to several nodes. Sometimes multiple grounds are used and a corresponding grounding is required for each signal. For each signal, CREE LED Power Supply PCBa has a path from the node to the integrated circuit that is powered by the charge in a different wire in the wire or battery. When the signal is connected to ground, it is received by the integrated circuit. The integrated circuit converts the charge into a command and sends it along other paths to the connection to the solder joint. CREE LED Power Supply PCBa's structure can be thought of as a simple node (and the connection between these nodes. Since the current is close to the speed of light, as long as they are connected, the path length between the nodes is not very important. Anything connected along these paths can usually be Simulate the function of the connected node.

Product specifications:

Model Number: MK-30705S15

Base Material: FR4

Copper Thickness: 10z

Board Thickness: 1.6mm

Min. Hole Size: 0.025mm

Min. Line Width: 0.075mm(3mil)

Min. Line Spacing: 0.075mm(3mil)

Surface Finishing: HASL

Max Panel size: 800*508mm

Board finished thickness: 0.2-4.0mm

Tolerance of finished panel thickness: ±10%

Surface Treating Process of Inner layer: Brown Oxide

Layer Count: 1-18

Impedance control and tolerance: 50O±10%

Peel strength of line: =107g/mm

Wrap and twist: =0.5%

Standard: IPC-A-610D

Service type: One-stop turnkey service

Previous:Power PCB Circuit Board Pattern Next:Power Supply Board PCB Assembly

Inquiry