Sim908 GPS Tracking Board

Sim908 GPS Tracking Board

This Sim908 GPS Tracking Board consists of 2 layers, making it easier to get more traces in the layout. The 2-layer PCB provides a larger surface area to accommodate the conductor pattern. Its surface is twice as large as the surface of a 1-layer PCB. The 1-layer PCB has only one layer of conductive material for low density and simple design.

Product Details

Product description:

This Sim908 GPS Tracking Board consists of 2 layers, making it easier to get more traces in the layout. The 2-layer PCB provides a larger surface area to accommodate the conductor pattern. Its surface is twice as large as the surface of a 1-layer PCB. The 1-layer PCB has only one layer of conductive material for low density and simple design. Its vias are used to create electrical connections that allow traces to reach the opposite side of the board. Sim908 GPS Tracking Board has no propagation delays or other issues. Its holes through the board should be plated, which means they are lined with metal and are well connected from front to back. It has multiple conductor patterns which increase the area available for wiring. Sim908 GPS Tracking Board increases the density and allows the traces to cross each other. To test the accuracy of the board, after developing and etching the printed circuit board, use a drill to make some random component holes on the entire board.

Product specifications:

Number of Layers: 2 Layer

Base Material: FR4 ,Aluminum,PI

Copper Thickness: 1oz

Board Thickness: 1.6mm

Min. Hole Size: 0.25mm

Min. Line Width: 0.1mm

Min. Line Spacing: 0.1mm

Surface Finishing: HASL,Nickle,Immersion Gold,Immersion Tin

Standard: IPC-A-610D

Wrap and twist: =0.5%

V-Score Depth: 20-25% of board thickness

Design File Formate: Gerber RS-274,274D,Eagle and AutoCAD's DXF,DWG

Solder mask color: Green,Blue,Black,White,Red,Yellow

PCB Special technique: Blind&buried via,Impedance control

PCBA Capabilities:

Quantity

Prototype&Low Volume PCB Assembly,from 1 Board to 250,is specialty,or up to 1000

Type of Assembly

SMT,Thru-hole

Components

Passive Down to 0201 size
BGA and VFBGA
Leadless Chip Carriers/CSP
Double-sided SMT Assembly
Fine Pitch to 0.8mils
BGA Repair and Reball
Part Removal and Replacement

Bare Board Size

Smallest:0.25*0.25 inches

Largest:20*20 inches



Previous:Rigid LCD Display PCB Assembly Next:OEM GPS Tracking System

Inquiry