Eagle PCB Circuit Prototype

Eagle PCB Circuit Prototype

When the soldering step of this Eagle PCB Circuit Prototype is completed, the final inspection will test the functionality of the PCB. This type of inspection is called a functional test to allow the PCB to complete its pace and simulate the normal operation of the PCB. In this test, the power and analog signals pass through the PCB while the tester monitors the electrical characteristics of the PCB. According to company standards, a failed PCB can be recycled or scrapped.

Product Details

Product description:

When the soldering step of this Eagle PCB Circuit Prototype is completed, the final inspection will test the functionality of the PCB. This type of inspection is called a functional test to allow the PCB to complete its pace and simulate the normal operation of the PCB. In this test, the power and analog signals pass through the PCB while the tester monitors the electrical characteristics of the PCB. According to company standards, a failed PCB can be recycled or scrapped. Testing is the most important step in the PCB assembly process because it determines the success or failure of the process. The assembly process of this Eagle PCB Circuit Prototype may be a filthy process. Solder paste leaves a certain amount of flux, and manual operations can transfer oil and dirt from the fingers and clothing to the PCB surface. Once completed, the results look a bit bleak, which is both aesthetic and practical. After a few months remaining on the PCB, the flux residue began to smell and felt sticky. It also becomes somewhat acidic and can damage solder joints over time. Therefore, this Eagle PCB Circuit Prototype has been carefully cleaned to complete all welding steps to ensure customer satisfaction. Stainless steel high pressure cleaning equipment using deionized water is the best tool for removing residues from the PCB. Cleaning the PCB in deionized water does not pose a threat to the device. This is because ions in conventional water can damage the circuit, not the water itself. Therefore, deionized water is harmless to the PCB when it undergoes a washing cycle.

Product specifications:

Place of Origin: Guangdong, China (Mainland)

Brand Name: moko

Model Number: MK41227BE01

Number of Layers: 2 layer

Base Material: fr4

Copper Thickness: 1oz

Board Thickness: 1.6mm

Min. Hole Size: 0.25mm

Min. Line Width: 0.1mm

Min. Line Spacing: 0.1mm

Surface Finishing: HASL

Max Panel size: 800*508mm

Board finished thickness: 0.2-4.0mm

Tolerance of finished panel: ±10%

Surface Treating Process of Inner: Brown Oxide

Impedence control and tolerance: 50O±10%

Wrap and twist: =0.5%

Standard: IPC-A-610D

Service type: One-stop turnkey service

Previous:Switching Power Supply Circuit PCBA Next:LED Light PCB Controller Board

Inquiry