Electronic Circuits Board Assembly

Electronic Circuits Board Assembly

In order to bond the solder used in this Electronic Circuits Board Assembly to the metal surface, the surface also needs to be heated. The solder is slightly soldered to the metal surface. Soldering irons are not specifically designed to melt solder, they are used to heat the surface so the surface can melt the solder.

Product Details

Product description:

1. In order to bond the solder used in this Electronic Circuits Board Assembly to the metal surface, the surface also needs to be heated. The solder is slightly soldered to the metal surface. Soldering irons are not specifically designed to melt solder, they are used to heat the surface so the surface can melt the solder. The soldering effect is best when the metal surface is heated and the solder melts on the heated metal surface. When the molten solder comes into contact with a suitably heated metal surface, it attracts it like a magnet. The good soldered connection of this product can be maintained like a super glue.

2. When we route this Electronic Circuits Board Assembly, we need to solder the wires to the signal of each desired button and connect the wires to each unique ground used by these signals. Grounding is usually shared around the PCB and can therefore be shared between all signals. When we draw this Electronic Circuits Board Assembly, place the PCB on a non-conducting object, insert, wire, and then tap on both ends of the PCB path, paying attention to what commands have occurred to determine what each path represents. Again, signals usually have unique paths and the ground will be shared. Use it to identify the paths and nodes that can be connected to wires.

Product specifications:

Place of Origin: Guangdong, China (Mainland)

Brand Name: OEM

Model Number: MK-PCBA-50831

Base Material: FR4

Copper Thickness: 1oz,2oz

Board Thickness: 1.0mm,1.6mm,2mm

Min. Hole Size: 0.025mm

Min. Line Width: 0.075mm(3mil)

Min. Line Spacing: 0.075mm(3mil)

Surface Finishing: HASL, ENIG

Warranty: 2 years

Max Panel size: 800*508mm

Tolerance of finished panel thickness: ±10%

Surface Treating Process of Inner layer: Brown Oxide

Layer Count: 1-18

Impedence control and tolerance: 50O±10%

Peel strength of line: =107g/mm

Wrap and twist: =0.5%

Standard: IPC-A-610D

Service type: One-stop turnkey service


Previous:High Precision Traffic Control Board Next:Industrial Control PCB Circuit Assembly

Inquiry