Electronic Prototype PCB Assembly

Electronic Prototype PCB Assembly

Electronic Prototype PCB Assembly's decoupling capacitor is a ceramic capacitor. Their function is to help suppress any spikes or transients that may enter the power supply. There is one on each side of the voltage regulator.

Product Details

Product description:

Electronic Prototype PCB Assembly's decoupling capacitor is a ceramic capacitor. Their function is to help suppress any spikes or transients that may enter the power supply. There is one on each side of the voltage regulator. These capacitors are not sensitive to polarity so they can be placed in any way. Its regulator is an incredibly neat little component that can be used with the right voltage on one side and 5V on the other side. Electronic Prototype PCB Assembly must be installed in the correct way, so the PCB graphic shows the outline of the plastic casing. Electronic Prototype PCB Assembly's electrolytic capacitors are designed to eliminate any ripple or spurs on the power supply. The circuit gets its own 5V supply from the mains and has a small container that can handle any dips or glitches that can be caused by large load switching. The component is polarity sensitive and must be installed in the correct way to avoid damage. One side of the PCB pattern is marked with a "+" symbol, with the longest wire on the side of the capacitor facing the side. The negative side of the capacitor is usually marked with stripes with a "-" symbol on it.

Product specifications:

Place of Origin: Guangdong, China (Mainland)

Brand Name: OEM

Model Number: MK-PCBA-21029269

Number of Layers: 4-Layer

Base Material: FR4

Copper Thickness: 1OZ

Board Thickness: 1.6mm

Min. Hole Size: 0.25mm

Min. Line Width: 0.075mm(3mil)

Min. Line Spacing: 0.075mm(3mil)

Surface Finishing: HASL

Max Panel size: 800*508mm

Board finished thickness: 0.2-4.0mm

Tolerance of finished panel thickness: ±10%

Surface Treating Process of Inner layer: Brown Oxide

Layer Count: 1-18

Impedance control and tolerance: 50O±10%

Peel strength of line: =107g/mm

Wrap and twist: =0.5%

Standard: IPC-A-610D

Service type: One-stop turnkey service

Previous:Automative SMT Electronics PCBA Board Next:Electronic Smt Printed Circuit Board

Inquiry