Electronic Smt Printed Circuit Board

Electronic Smt Printed Circuit Board

When soldering this Electronic Smt Printed Circuit Board, we often test the PCB. Check every few attachments to see if they work properly. First connect the ground and test the signal at any time. This test is a good way to reduce the time and place of problems during the soldering process.

Chat Now

Product Details

Product description:

When soldering this Electronic Smt Printed Circuit Board, we often test the PCB. Check every few attachments to see if they work properly. First connect the ground and test the signal at any time. This test is a good way to reduce the time and place of problems during the soldering process. Each selected weld location of this Electronic Smt Printed Circuit Board is not in contact with other welds or components or joints. If necessary, our operators use a grinding head to scratch rubber or light green protection and expose the metal to areas where solder can be attached. It is even possible to solder wires to thin paths in other paths. We also use pins and carefully scrape the correct path of this Electronic Smt Printed Circuit Board and avoid scratching other paths. It is necessary to support the wires and glue immediately to maintain such a weld and not to tear the path.

Product specifications:

Place of Origin: Guangdong, China (Mainland)

Brand Name: OEM

Model Number: MK-PCBA-826

Base Material: FR4

Copper Thickness: 1OZ

Board Thickness: 1.6mm

Min. Hole Size: 0.25mm

Min. Line Width: 0.075mm(3 mil)

Min. Line Spacing: 0.075mm93 mil)

Surface Finishing: HASL

Max Panel size: 800*508mm

Board finished thickness: 0.2-4.0mm

Tolerance of finished panel thickness: ±10%

Surface Treating Process of Inner layer: Brown Oxide

Layer Count: 1-18

Impedence control and tolerance: 50O±10%

Peel strength of line: =107g/mm

Wrap and twist: =0.5%

Standard: IPC-A-610D

Service type: One-stop turnkey service

Previous:Electronic Prototype PCB Assembly Next:Thick Copper PCB Power Board

Inquiry