For the production of printed boards, because many designers do not understand the production process of the circuit board, the circuit diagram of the design is only the most basic circuit diagram, and can not be directly used for production. Express Printed Circuit Board has the advantages of simple design, fast production process, relatively low cost and easy quality control.
Materials that we keep in stock are:
FR4 (Tg – 135C, 145C, 170C)
Rogers Ultralam 2000
If you don’t see the material above, please contact us because we most likely have it in stock, but not listed above, or can special order it for you.
Save the Express Printed Circuit Board and components properly to minimize the storage cycle. In the soldering process, the dust-free, grease, oxide copper foil and component leads help to form qualified solder joints, so the printed boards and components should be kept dry. In a clean environment, and to minimize storage cycles. For printed boards that have been placed for a long period of time, the surface is generally cleaned to improve solderability and reduce solder joints and bridging. For component leads that have a certain degree of oxidation on the surface, the surface oxide layer should be removed first.