LED Light PCB Controller Board

LED Light PCB Controller Board

The simple goal of LED Light PCB Controller Board's wiring is to connect the ground and signal of each device to ground and provide the appropriate signals on the PCB. When the switch is turned on, the circuit between the ground and the signal should be completed and the signal sent from the PCB to the computer or console via a wire or remote control.

Product Details

Product description:

LED Light PCB Controller Board was physically composed in the past with the help of a photo cover on a sheet. The schematic circuit is used to draw on plain paper. LED Light PCB Controller Boards welded parts were once manually placed on the board. Guide the copper wire to connect the mats. Use a self-adhesive tape to make the chopper. Polyester film sheets have a matrix guide for each printed and non-replicated. Finally, the board was created with the completed photo cover. The photo cover is taken and the lithographic print is copied to the photo. This photo is covered by a covered copper plate. The simple goal of LED Light PCB Controller Board's wiring is to connect the ground and signal of each device to ground and provide the appropriate signals on the PCB. When the switch is turned on, the circuit between the ground and the signal should be completed and the signal sent from the PCB to the computer or console via a wire or remote control. Wires and connectors, solder or twists are used to connect the device to the PCB.

Product specifications:

Place of Origin: Guangdong, China (Mainland)

Brand Name: OEM

Model Number: MK-PCBA-21029689

Number of Layers: 2 Layer

Base Material: FR4

Copper Thickness: 1OZ

Board Thickness: 1.6mm

Min. Hole Size: 0.25mm

Min. Line Width: 0.075mm(3mil)

Min. Line Spacing: 0.075mm(3mil)

Surface Finishing: HASL

Max Panel size: 800*508mm

Board finished thickness: 0.2-4.0mm

Tolerance of finished panel thickness: ±10%

Surface Treating Process of Inner layer: Brown Oxide

Layer Count: 1-18

Impedance control and tolerance: 50O±10%

Peel strength of line: =107g/mm

Wrap and twist: =0.5%

Standard: IPC-A-610D

Service type: One-stop turnkey service

Previous:Eagle PCB Circuit Prototype Next:FR4 4-Layer Rigid PCB

Inquiry