Reliable 8 Layer GPS Receiver Printed Circuit Board

Reliable 8 Layer GPS Receiver Printed Circuit Board

A copper wire (called a trace) above Reliable 8 Layer GPS Receiver Printed Circuit Board electrically connects the connector and the components to each other. They run signals between these functions, allowing the board to operate in a specially designed manner.

Chat Now

Product Details

Product description:

A copper wire (called a trace) above Reliable 8 Layer GPS Receiver Printed Circuit Board electrically connects the connector and the components to each other. They run signals between these functions, allowing the board to operate in a specially designed manner. Its pedestal consists of multiple layers, each of which plays an important role in the function of the final PCB. The substrate is the basic material of the PCB, which gives the PCB rigidity. Add a thin layer of conductive copper foil on each functional side of the product, which is a copper trace layer. The top of Reliable 8 Layer GPS Receiver Printed Circuit Board's copper layer is a solder mask that provides each PCB with its characteristic green color. The solder it uses keeps everything in place. The holes in the solder mask are where solder is applied to attach the component to the board. The solder mask is a critical step in the smooth fabrication of PCBA because it avoids soldering on unwanted components and avoids short circuits. White screen printing is the last layer on the Reliable 8 Layer GPS Receiver Printed Circuit Board. This layer adds labels to the PCB in the form of characters and symbols. This helps to indicate the function of each component on this product. These materials and components remain essentially the same on all PCBs except the substrate.

Product specifications:

Place of Origin: Guangdong, China (Mainland) 

Brand Name: GPS PCB 

Model Number: EW-50906S02 

Number of Layers: 8-Layer 

Base Material: FR4 

Copper Thickness: 0.5-5 OZ 

Board Thickness: 0.4 to 6.0mm(4 to 240mil) 

Min. Hole Size: 0.025mm 

Min. Line Width: 0.075mm(3mil) 

Min. Line Spacing: 0.075mm(3mil) 

Surface Finishing: HASL, ENIG 

Max Panel size: 800*508mm 

Board finished thickness: 0.2-4.0mm 

Tolerance of finished panel thickness: ±10% 

Surface Treating Process of Inner layer: Brown Oxide 

Layer Count: 1-18 

Impedance control and tolerance: 50O±10% 

Peel strength of line: =107g/mm 

Wrap and twist: =0.5% 

Standard: IPC-A-610D 

Service type: One-stop turnkey service . 

Previous:OEM GPS Tracking System Next:Quick GPS Tracker OEM PCBA Manufacturer

Inquiry